Driveway gates are an important safety feature for your home. Gates and fences help to deter criminals by making it more difficult for them to get into your home.
They also provide added resale value when it comes time to sell your home in San Luis Obispo, Pismo Beach, Big Sur and the surrounding areas.
If you are considering increasing your security, get to know the process that’s required for proper installation before you start thinking about DIY driveway gate installation.
Even better? Call Surfliner Fence and let our experts take care of everything for you.
1. Choose the Right Gate
Your priority when choosing a driveway gate is to decide whether you want swinging or sliding, automatic or manual gates.
Next, you need to decide on a material that will add pizazz to the front of your house and match any existing fencing. The last step is figuring out what size gate you need.
Just like you need to measure carefully for fence installation, you need to get out your tape measure before deciding on what size gate you need.
2. Read the Warranty and Manual
This is where many homeowners DIY gate installation aspirations end. The warranty on most gate kits is only valid if a professional technician installs the gates.
If you decide to proceed, read over the installation manual a few times. Make sure you have all the necessary tools at hand before you begin work.
3. Level the Ground
If the manual still hasn’t convinced you to give us a call, here’s your next step.
Level the ground around your entranceway. The gates won’t be able to open and close properly on uneven ground. And they will likely become damaged if they jam against the surface of your driveway.
Likewise, remove any obstacles that will affect the operation of the gate.
4. Set the Gate Posts
The manufacturer’s manual should provide detailed instructions on how to position your gate and set your posts.
The posts normally have markings to show where the bottom of the gate should be when installed. You usually have to provide at least 3 inches of clearance between the ground and these markings.
Be sure to consider the placement of the gate hinges when working out where to put your posts. Watch your property line as well so there are no disputes after installation.
5. Dig Holes for the Posts
When you’ve figured out the complex math involved in placing your posts, mark the ground in the appropriate spots.
Be sure to check with your local authorities to make sure you won’t be disturbing any important utility lines when you start excavating for a driveway gate installation. When you know it’s safe, you can go ahead and dig the holes for your gate posts.
Dig the holes about 6 inches deeper than needed and fill the extra space with concrete. This prevents the gate posts from settling and disturbing the operation of your gate. Let the concrete settle for 2 days before you continue.
It is very important to ensure that the posts are level once they’re in the ground. If they aren’t, your gates will hang awkwardly and they won’t close correctly.
A professional gate installer will have all the tools to get this step exactly right.
6. Go Ahead with Driveway Gate Installation
If you’ve gotten the posts correctly placed, you can finally install the rest of the gate per the manufacturers’ instructions.
Keep measuring and checking that everything is level as you work.
The Easiest Way to Install Driveway Gates
Driveway gate installation isn’t an exact science or particularly difficult. Yet there are risks involved. Incorrectly installed driveway gates can be dangerous.
It pays to get professionals who know how to install a driveway gate to do the work. This is especially true in the case of automatic gate systems.
Getting in touch with a registered fencing specialist is the quickest and easiest way to get your driveway gates installed. At Surfliner Fence, we serve San Luis Obispo, Pismo Beach, Big Sur and the surrounding areas. Give us a call!